ThermoCoolHubHVAC, refrigeration, cold chain, compressors, heat pumps, and ventilation equipment for global industrial buyers.
Exposed Fastener Metal Roof & Wall Panels | Metl-Span
Cold Room Panels

Exposed Fastener Metal Roof & Wall Panels | Metl- | RFQ Sourcing Details

Cold Room Panels · Quote on request

This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.

Quote on request

Product specs

CategoryCold Room Panels
Unitset
ASTM C1363Thermal Performance of Building Materials and Envelope Assemblies 35° WALL-ROOF 1.5″ = 0.071-0.071 2″ = 0.055-″ = 0.044-0.044 3″ = 0.037-0.037 4″ = 0.028-0.029 5″ = 0.023-0.023 6″ = 0.019-0.020
Air InfiltrationASTM E1680 Rate of Air Leakage Through Exterior Metal Roof Panel Systems
Coverage Width36″
FinishesFluropon®, Fluropon® Premier, Fluropon® Classic, Flurothane®, Flurothane® Coastal, WeatherXL™, Igloo White Polyester
JointOverlapping with a single tongue-and-groove.
Length8′-0″ to 50′-0″, See Material Specifications
CategoryCold Room Panels
AvailabilityInquiry required
Source date2026-05-26

Buyer's Digest

Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Cold Room Panels. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.

Original product description

Commercial & Industrial Products LS-36 ™ Insulated Roof and Wall Panel Home | Products | Wall | Insulated Metal Panels | LS-36™ Insulated Roof and Wall Panel Back to Previous Page Download as PDF LS-36™ Insulated Roof and Wall Panel The LS-36™ insulated, exposed fastener metal wall and roof panel achieves unmatched insulation values.

The panel provides versatility given its design options and functions as either a wall or roof for various commercial and industrial applications. The overlapping, through-fastened joint, paves the way for an efficient installation, resulting in reduced labor and energy costs.

The panel can be used on the roof slopes as low as 1/2″:12″ Coverage Width 36″ Thermal Values – R-Value & U-Factor U-Factor (BTU/h-ft2*fahrenheit) Panel Width: 36” WALL | ROOF 1.5″ = 0.071 | 0.071 2″ = 0.055 | ″ = 0.044 | 0.044 3″ = 0.037 | 0.037 4″ = 0.028 | 0.029 5″ = 0.023 | 0.023 6″ = 0.019 | 0.020 R-Value (h*ft2*F/BTU) Panel Width: 36″ 1.5″ = 13.4 2″ = 17.9 2.5″ = 22.4 3″ = 26.9 4″ = 35.9 5″ = 44.8 6″ = 53.8 Exterior Face G-90 galvanized or AZ-50 aluminum-zinc coated steel in 26, 24 or 22 Ga.

Only available for wall applications Interior Face G-90 galvanized or AZ-50 aluminum-zinc coated steel in 26, 24 or 22 Ga. Finishes Fluropon®, Fluropon® Premier, Fluropon® Classic, Flurothane®, Flurothane® Coastal, WeatherXL™, Igloo White Polyester Joint Overlapping with a single tongue-and-groove.

Length 8′-0″ to 50′-0″, See Material Specifications Thickness 1½”, 2″, 2½”, 3″, 4″, 5″, 6″ applications Through-fastened Easy and fast installation, with reduced construction labor costs Color Offerings Explore Color Chart 1.

Metallic paint finishes will exhibit color shift, shade variances, striations and longitudinal patterning that are inherent characteristics and are not a product defect or cause for rejection. 2. All Metl-Span colors are formulated to provide maximum energy-efficiency and solar reflectivity.

All standard available Premium I and Premium II colors have been formulated for maximum solar reflectance. 3. Prices vary by color, gauge and quantity of metal. Please . 4.

All colors shown are approximate actual finish colors displayed as accura terature Product Showcase LS-36 Wall Data Sheet – PIR LS-36 Roof Data Sheet – PIR Metl-Span ® CF LS-36TM Insulated Wall and Roof Panel For Commercial & Industrial Buildings 2012 Master Format™ Section Ls-36 Guide Specifications with PIR US Document Ls-36 Guide Specifications with PIR US PDF All specifications and designs are subject to change without notice.

Load Span Tables The Load Span Table below is based on Allowable Stress Design (ASD). For loads calculated based on ASCE 7-10 (LRFD), please refer to section 2.4.1 of ASCE 7-10 for the applicable load combinations using Allowable Stress Design.

For FM Global Requirements, click here LS-36 26ga Roof PIR Load Span Table LS-36 26ga Wall PIR Load Span Table LS-36 24ga Roof PIR Load Span Table LS-36 24ga Wall PIR Load Span Table Panel Weights Our team is currently updating the weight tables for LS-36. For assistance with specific weight values, please .

Find a Rep Roofing Systems LS-36 Roof Details LS-R-01: Roof Low Eave Detail LS-R-02: Roof Low Eave w/ Gutter Detail LS-R-03: Roof Rake Detail LS-R-04: Roof Ridge Detail LS-R-05: Roof End Lap Detail LS-R-06 Roof Low Eave w/ Northern Gutter Terra.

Vue™ Roof Details Cold Storage Details with Parts Cold Storage Details C&I Details with Parts C&I Details Commercial & Industrial Panels – Horizontal Base Details H-BE-01: C&I Horizontal Base Detail w/ Extended Trim Leg H-BE-02: C&I Overhang Horizontal Base Detail w/ Drip Edge H-EB-01: C&I Flush Horizontal Extruded Base Detail Corner Details H-CE-01: C&I Horizontal Outside Corner Detail H-CE-02: C&I Horizontal Inside Corner Detail H-CE-03: C&I Horizontal Formed Corner Detail H-CE-04: C&I Horizontal Trimless Inside Corner Detail H-EC-01: C&I Horizontal Extruded Outside Corner Detail Eave, Parapet & Soffit Details H-BE-03: C&I Horizontal Wall & Soffit Detail Header, Jamb & Sill Details H-EW-01: C&I Horizontal Offset Window Header Detail w/ Extrusion H-EW-02: C&I Horizontal Offset Window Jamb Detail w/ Extrusion H-EW-03: C&I Horizontal Extruded Window Sill Detail H-WH-01: C&I Horizontal Window Header Detail H-WJ-01: C&I Horizontal Window Jamb Detail H-WS-01: C&I Horizontal Window Sill Detail Joint Details H-JT-01: C&I Horizontal Side Joint Detail H-JT-02: C&I Horizontal Side Joint Detail H-VJ-01:C&I Horizontal Vertical Joint with Gasket H-VJ-02: C&I Horizontal Vertical Joint Detail with Wet Seal Commercial & Industrial Panels – Vertical C&I CF Vertical Detail Book C&I CF Vertical: Detail Book – PDF C&I CF Vertical: Detail Book – PDF with Part Numbers V6 X-Span Clip V6 X-Span Clip V6 X-Span Clip Promo V6 X-Span Edge Trim Roofing Systems LS-36 IMP Roof Low Eave IMP Roof Low Eave w/ Standard Gutter IMP Roof Rake IMP Roof Ridge IMP Roof End Lap IMP Roof Low Eave w/ Northern Gutter Terra.

Vue™ Roof C&I Details Cold Storage Details General Notes Commercial & Industrial Panels – Horizontal C&I Panels Horizontal C&I Horizontal Extruded Sill Detail C&I Horizontal Trimless Outside Corner Detai l C&I Horizontal Extruded Sill Detail Horizontal Head Detail w/ Extrusion Horizontal Jamb Detail w/ Extrusion Horizontal Base Detail at Floor w/ Extrusion Horizontal Detail at Floor w/ Lip Trim Horizontal Overhanging Base w/ Drip Trim Horizontal Head Detail w/ Drip Trim Horizontal Outside Corner Detail Horizontal Inside Corner Detail Horizontal Inside Corner Detail w/ Joint Gasket Horizontal Jamb Detail Sill Detail w/ Trim Soffit Detail Outside Corner Detail w/ Extrusion Side Joint Attachment Detail Horizontal Installation Side Joint End-Dam Detail Vertical Joint Attachment Detail w/ Gasket Horizontal Installation Vertical Joint Attachment Detail – Wet Sealed Horizontal Installation Commercial & Industrial Panels – Vertical LS-36 Vertical Flush Base Detail Flush Base Detail w/ Extended Trim Leg Notch Base Detail w/ Drip Edge Notch Base Detail w/ Extended Trim Leg Overhang Base Detail w/ Support Overhang Base Detail w/ Drip Edge Overhang Base Detail w/ Reverse Hem Overhang Base Detail Extended Support Outside Corner Inside Corner Head Jamb Fastening Patterns Lap Joint Stack Joint C&I Panels – Vertical C&I Panels – Vertical Book V6 X-Span Clip V6 X-Span Clip Book Lorem ipsum dolor sit amet, consectetur adipiscing elit.

Ut elit it it it it it it it it it

Exposed | Applications and Buyer Notes

Exposed is organized as a sourcing-ready Cold Room Panels reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time question

Applications

  • Initial shortlist building for related product or supplier options.
  • Specification and application fit review before bulk purchasing.
  • Category, keyword and detail-page comparison before sending an RFQ.

Key specifications

Category
Cold Room PanelsBased on visible page data; confirm exact value in the RFQ.
Unit
setBased on visible page data; confirm exact value in the RFQ.
ASTM C1363
Thermal Performance of Building Materials and Envelope Assemblies 35° WALL-ROOFBased on visible page data; confirm exact value in the RFQ.
Air Infiltration
ASTM E1680 Rate of Air Leakage Through Exterior Metal Roof Panel SystemsBased on visible page data; confirm exact value in the RFQ.
Coverage Width
36″Based on visible page data; confirm exact value in the RFQ.
Finishes
Fluropon®, Fluropon® Premier, Fluropon® Classic, Flurothane®, Flurothane® CoastaBased on visible page data; confirm exact value in the RFQ.
Joint
Overlapping with a single tongue-and-groove.Based on visible page data; confirm exact value in the RFQ.
Length
8′-0″ to 50′-0″, See Material SpecificationsBased on visible page data; confirm exact value in the RFQ.

Buyer tips

  • State quantity range and split-delivery needs before price comparison.
  • Add certification, material or inspection standards when they affect acceptance.
  • For time-sensitive projects, include target arrival date and destination.
  • For special applications, describe operating condition, installation environment and duty cycle.

FAQ

What should buyers confirm first?

Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.

Can buyers inquire when specs are incomplete?

Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.

How should this listing be evaluated?

Check title, category, specifications and related keywords against the actual sourcing requirement.

Source mix: ugc

Key specifications

CategoryCold Room Panels
Unitset
ASTM C1363Thermal Performance of Building Materials and Envelope Assemblies 35° WALL-ROOF 1.5″ = 0.071-0.071 2″ = 0.055-″ = 0.044-0.044 3″ = 0.037-0.037 4″ = 0.028-0.029 5″ = 0.023-0.023 6″ = 0.019-0.020
Air InfiltrationASTM E1680 Rate of Air Leakage Through Exterior Metal Roof Panel Systems
Coverage Width36″
FinishesFluropon®, Fluropon® Premier, Fluropon® Classic, Flurothane®, Flurothane® Coastal, WeatherXL™, Igloo White Polyester
JointOverlapping with a single tongue-and-groove.
Length8′-0″ to 50′-0″, See Material Specifications
NFPA 285-19Evaluation of Fire Propagation Characteristics of Exterior Non-Load Bearing Wall Assemblies Panel assembly met the requirements of the standard
Test/ApprovalTest Method Test Title Results
Thermal Values – R-Value & U-FactorU-Factor-ft2*fahrenheit) Panel Width: 36” WALL-ROOF 1.5″ = 0.071-0.071 2″ = 0.055-″ = 0.044-0.044 3″ = 0.037-0.037 4″ = 0.028-0.029 5″ = 0.023-0.023 6″ = 0.019-0.020 R-Value
Thickness1½”, 2″, 2½”, 3″, 4″, 5″, 6″
Water InfiltrationASTM E1646 Water Penetration of Exterior Metal Roof Panel Systems by Static Air Pressure Differences No uncontrolled leakage when tested to a static pressure of 20 psf

Product sourcing keywords

These terms come from the title, visible copy and specifications, and link into matching aggregate pages.

Continue from this detail page into sourcing structure

These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.

ThermoCoolHub related sourcing paths

Related categories ThermoCoolHub related paths

Compressors, Condensers and Parts

Cold Room Equipment

Commercial Refrigeration

Related applications ThermoCoolHub related paths

Cold Chain Storage

Commercial Building HVAC

Related solutions ThermoCoolHub related paths

Cold Room Equipment Sourcing

Refrigeration Parts Replacement

ThermoCoolHub procurement phrases

ThermoCoolHub related product samples

Supplier profile

ThermoCoolHub Imported Supplier Pool
主营:Cold Room Panels

View full profile >